In order to remove the hole plugs from our panels in a manner that does not mar or scratch the panel surface, please watch this YouTube on how to remove them easily: Removing Panel Hole Plugs

Tools Needed:
Drill with 1/8″ bit
Needle Nose Pliers

(1) Drill a hole in the center of the locking hole plug, using the forward setting
(2) Reverse the drill, and slowly engage bit while pulling out slightly
(3) If the plug does not come out after steps 1 & 2:
(4) Insert one half of the jaws of a pair of needle nose pliers into the hole you created
(5) Being careful not to scratch the panel with the half of the jaws not in the hole, use the pliers to wiggle and pull the plug out